Integrated LiDAR-Based Localization Correction Using a Dedicated Support Sign for Autonomous Vehicles

Engineering notes

Key topics: autonomous driving, autonomous vehicle, lidar, point cloud. See the paper for implementation details and experimental results.

Chinese explanation / 中文解读

中文解读待补充：本站会优先为端到端自动驾驶、BEV感知、3D目标检测、轨迹预测、路径规划、LiDAR感知等高价值论文补充中文说明。

Original abstract

Accurate vehicle localization must be maintained even in tunnel sections where GNSS reliability is degraded. However, conventional GNSS/INS-based localization rapidly accumulates errors in such environments, affecting lane-level decision-making and path-following stability. To address this problem, this study proposes a dedicated localization support sign for stable LiDAR observation and a point-cloud-registration-based correction algorithm. The proposed method detects a dedicated sign using a PointPillars-based detector, and the corresponding point cloud is registered to a pre-built reference map to estimate a rigid correction transform online. The sign was installed in a tunnel section of a proving ground that reproduces real-road conditions. For evaluation, the driving sequence was analyzed by separating the pre-entry section, the tunnel section before dedicated-sign recognition, and the section after dedicated-sign recognition. The proposed pipeline substantially reduced localization error after dedicated-sign recognition, compared with the GNSS/INS-only baseline. The dedicated sign also provided more stable correction than ordinary tunnel structures within the same registration pipeline. These results indicate that the proposed LiDAR-based pipeline can suppress localization drift in GNSS-degraded sections.

Links and sources

• PDF from original source

Comments